fbpx

Dealing with a wet carpet is tough. It can cause damage to your home that can extend beyond the flooring. And this situation can pose a large problem, including moulds building inside your home.

In this article, you will learn more about moulds in wet carpets and how to do carpet drying to prevent its spread.

Mould in Wet Carpets

Mould is a form of fungus and thrives in damp carpets. This is not good news for those who have carpeted homes and houses that are constantly flooded or do not have the right place for carpet drying.

Mould reproduces by spores, making it easy for it to start spreading in your carpet. Spores are primarily present in the air. And when these annoying things fall on a wet surface, it will create a mould problem.

Mould thrives in the moisture of a damp carpet, and it can start rising and spreading in as little as 24 to 48 hours. It’s for this reason that you can never leave your carpet damp.

Allergic Reactions in Touching or Inhaling Moulds

Mould can cause moderate to serious health problems and destroy the carpet and flooring like a slow poison. Here are some reactions that you may face:

  • Asthma attacks

  • Irritated eyes

  • Itchy throat

  • Runny/itchy nose

  • Shortness of breath

  • Skin rashes

  • Sneezing

  • Wheezing

Even if mould is not always visible, you may still have these effects. For this reason, wet carpets can cause a problem and do water damage carpet drying as soon as possible.

Carpet Drying in Sydney

To avoid mould growing when doing your own carpet drying you must learn how to perform it correctly.

Here are the steps to follow for efficient and effective carpet drying:

Get Rid of the Furniture

Remove all furniture or other items on the carpet first. Water damage carpet drying with something heavy on top of it will leave dents in it and reduce its fluffiness. This will also allow air to circulate easily around the wet area without obstructing, speeding up the drying process.

Remove All the Moisture

Stopping water from pouring into the problem area is the most important step. You can use a wet vacuum to remove the moisture or water from your carpet. It is an excellent method for removing water from the furniture. If you need one, its price is reasonable, or you can easily rent one if you need it once.

Make the Room Dry

After water damage, you may find excessive moisture in the room or area after water damage, not just the carpet. Using a dehumidifier to drain humidity from the air around the infected area is an effective way. It can also keep carpet mould and mildew from developing the room’s other spaces.

Use a Steamer for the Carpet and Flooring

To thoroughly sanitise and deodorise all carpets, you must steam clean them. Replacing the padding in a water-damaged carpet usually need replacement. Take note that it is less costly to only replace the padding rather than re-carpeting your entire house.

Do Not Forget to Sanitise

Clean the other surfaces in the room carefully to avoid the spread of mould and mildew. Remove any remaining water from your space by scrubbing the walls and baseboards.

In Conclusion

Mould is likely to occur, especially if you have a flooded carpet. These can cause allergic reactions that can be severe to other people. You can stop this from happening by learning how to do carpet drying, or if you cannot, you can always call Mr. Flood to save the day, 1300 673 566.

2021-04-19T06:33:32+00:00 April 19th, 2021|